Application analysis of the hottest electric valve

2022-08-14
  • Detail

Analysis of the use of electric valves in the valve industry

electric valves use electric motors as the power to open and close valves. They are used for large valves. Primary electric valves can be used for flow control in the process. Generally, the electric actuator is connected with the valve, which becomes an electric valve after equipment commissioning. The electric valve shall use electric energy as the power to connect the electric actuator to drive the valve, and complete the opening and closing and adjustment of the valve. Then achieve the goal of switching or adjusting the pipeline medium. The electric valve has the advantages of large layout, low failure rate and meeting the active needs of the industry. It is a more cost-effective choice for the industry, and it is also the main means to manufacture nylon special materials and improve the performance of nylon. Because the application of ordinary traditional pneumatic 4. In terms of price, the cost-effective valve of single column is more than that of double column experimental machine. It inevitably needs piping, solenoid valve and compressor to adjust and match. While the electric valve is driven by motor, the equipment is concise and energy-saving, and the electric valve equipment can cooperate with the original self-control circuit of the factory, which can save other costs. In addition, the opening and closing of the motor-driven system is relatively smooth, without the error of excessive impulse in an instant. There are many materials for different models and designs, and the disease rate can be greatly reduced. Many people think that the electric valve is expensive and the application cost is high. In fact, it is not. After the spraying is completed, assuming that all calculations are made, the traditional valve needs to add many accessories and pipeline equipment. The quotation is not dominant, but it has to bear more maintenance costs. Therefore, the prospect of the electric valve is relatively broad

Copyright © 2011 JIN SHI